gelcoat/fiberglass repair

[delman]

I put a 2" hole in the fiberglass/gelcoat under the front of my 5th wheel. It happened when I went over some uneven terrain and the nose of the 5er made contact with the bed rail of the pickup bed. The hole does not go all the way thru and I can see the fiberglass material so I presume that the gelcoat is what actually cracked and left the hole.
Is this something that the average bear can repair? Would appreciate any advice on what product(s) and equipment would I need....and the steps to take.
Thanks

[Carl]

It can be repaired. Depending on the color and how faded it is, the fix may not be noticable. Try calling West Marine at 1 800-262-8464 and speak to someone there. If you have a West Marine in your area, go there and talk to them.
Many years ago, I repaired gelcoat problems for Stamas Boats. If the mold was not waxed well enough, the boat would be damaged when it was pulled from the mold. My job was to fix those dings. They have come a long way with fiberglass since I worked with it. I bet they have a patch kit for sale today. Back when I was doing repairs, I had to mix my own. Was a little tricky and I had to add a drop or two of styreen into my mix or it would never dry so it could be wet sanded. Of course, any fix will have to be buffed out after the fix. Carl

[delman]

Thanks Carl, I'll give them a call.