Hi evryone, I am a newbi
I have a 1996 pace arrow 36 foot.
ford 7.5 engine 36,000 miles.
water temp guage runs all the way over to the "L" in normal when under a load.
Is this anything to worry about.
also just had coolant flushed.
Have you had the fan clutch checked lately to make sure it is working OK? Also, are your other gauges reading on the high side? The reason I ask is that it could be that the Instrument Voltage Regulator (IVR) is out of adjustment and pulsing the gauges with a little higher voltage than spec which will cause the gauges to read higher. I had this problem on an E-350 460 van.
I'll second Mickeys statement...before going too deep into the engine I would sure check the temp. with another gauge..."Been there done that", installing a second good guality gauge is sure cheap insurance... saved me big time in the past.